If we ignore the uphill/downhill aspects of my ride, we see that I had eight calibration rides over the 180.6 meter distance.
I normally calibrate on a flat 1000 feet, and almost always have a span of fewer than two counts for four rides. If my eight rides are converted to rides on 1000 feet we see the following counts (rounded to nearest count):
3347
3349
3348
3351
3347
3348
3351
3348
Above counts reflect use of a JO Counter with a ratio of 23.636363 counts per revolution.
If I saw these calibrations coming in an application I would think the riding was somewhat erratic but not terrible, and would likely not inquire as to the cause.