Reply to "Calibration Course thermometer placement"

pauladamsMember

This is a good topic. I recently set up a calibration course in the afternoon on a warm sunny day. I prefer to set up a clibration course on a cloudy day or early in the morning, but in this case I had no choice. After the measurement the rolled up tape felt warm to the touch so I tried to measure the temperature of the tape itself. I did this by placing my thermometer on an insulated surface and then placing the rolled up tape on top. After the temperature stabilized it read 34ºC so that is the temperature I used to shorten the calibration course.

6/21/098:37 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...